TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: power steering belt  (Read 4548 times)

Piojo

  • Full Member
  • ***
  • Posts: 116
power steering belt
« on: January 16, 2012, 09:09:00 AM »
how do i install the power steering belt? do i remove a pulley or can just mount the belt withou removing a pulley
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5494
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
power steering belt
« Reply #1 on: January 16, 2012, 10:18:00 AM »
Loosen the tensioner on the front of the power steering pump (its part of the bracket that sticks out) and the new belt will just slip onto the pulleys, don't need to remove anything at all.

The tensioner has two bolts, one is a 14 (on the side) that locks it and another 12mm (on the top) that adjusts the belt tension
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


rcdraco

  • Guest
power steering belt
« Reply #2 on: January 16, 2012, 10:19:00 AM »
Look at the power steering pump, there should be 2 bolts on the manual tensioner.  The belt tension is controlled by 2 bolts on the power steering pump, one on the side and one on top, just loosen them to get the belt off.
Logged

newboyracer

  • Jr. Member
  • **
  • Posts: 88
power steering belt
« Reply #3 on: January 16, 2012, 06:29:00 PM »
You will probally have to loosen the large silver bolt close to the engine as well (also a 14mm) in order for the power steering pump to move free enough to put on the belt.
Logged
Time is the greatest teacher, Unfortunatly it kills all it\\\'s students.