TeamCapri

General => Photographs => Topic started by: Xodus989 on August 12, 2008, 03:09:00 PM

Title: Custom Foglight Install
Post by: Xodus989 on August 12, 2008, 03:09:00 PM

Well, I decided I didn't want to spend 170 bucks + shipping on a stock foglight kit from MCM so I went and picked up my own kit from the store. I haven't had a chance to fire them up yet since I need a bandsaw or dremel to cut the screws down so they fit back in.  But what I did was take the intake port looking thing that pops out, and mounted them to that.  I had to cut out the fins, but that was fairly simple, then I had to put the holes in it BY HAND since my dad brought the drill to work instead of leaving at home where it's supposed to be.

Here's some BIG pics. So click on them  ;)

The casing, and the hacksaw blade I used to cut.
http://softmodfiles.net/images/capri/light/GEDC0486.JPG (http://softmodfiles.net/images/capri/light/GEDC0486.JPG)

Close up of after I cut + the removed fins
http://softmodfiles.net/images/capri/light/GEDC0487.JPG (http://softmodfiles.net/images/capri/light/GEDC0487.JPG)

Holes, the one on the right I started in the wrong spot  ;)
http://softmodfiles.net/images/capri/light/GEDC0488.JPG (http://softmodfiles.net/images/capri/light/GEDC0488.JPG)

The lights that are going in
http://softmodfiles.net/images/capri/light/GEDC0489.JPG (http://softmodfiles.net/images/capri/light/GEDC0489.JPG)

Final Holes
http://softmodfiles.net/images/capri/light/GEDC0490.JPG (http://softmodfiles.net/images/capri/light/GEDC0490.JPG)

SCREWED ON! You can see here where I need to cut the rest of the bolt / screw
http://softmodfiles.net/images/capri/light/GEDC0491.JPG (http://softmodfiles.net/images/capri/light/GEDC0491.JPG)
http://softmodfiles.net/images/capri/light/GEDC0492.JPG (http://softmodfiles.net/images/capri/light/GEDC0492.JPG)

This is how sort of how it will look once it's mounted all the way in. The screws stop me from snapping it all the way in, so it WILL be flush when it's done.
http://softmodfiles.net/images/capri/light/GEDC0493.JPG (http://softmodfiles.net/images/capri/light/GEDC0493.JPG)
http://softmodfiles.net/images/capri/light/GEDC0494.JPG (http://softmodfiles.net/images/capri/light/GEDC0494.JPG)

Title: Custom Foglight Install
Post by: spiro on August 17, 2008, 08:01:00 PM

Good luck with that install mate, hope all goes well.

  (http://graemlins/big-smile.gif)

Title: Custom Foglight Install
Post by: Xodus989 on August 20, 2008, 07:24:00 AM

Got them installed and semi-wired. Not neat yet since I'm going to be getting a switch panel.

But they look nice  (http://smile.gif)