TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: Oil Pan Gasket Removal?  (Read 1100 times)

nachius

  • Newbie
  • *
  • Posts: 22
    • formerly 91 n/a, now a 91 xr2 being built
Oil Pan Gasket Removal?
« on: September 14, 2022, 09:00:00 PM »
Alright I have all the bolts off and it's loose.  Do I have to pull the front swaybar and/or crossmember brace to get it the rest of the way out?  I searched and read most of the threads, but never found a good answer. 
« Last Edit: September 14, 2022, 09:06:05 PM by nachius »
Logged

nachius

  • Newbie
  • *
  • Posts: 22
    • formerly 91 n/a, now a 91 xr2 being built
Re: Oil Pan Gasket Removal?
« Reply #1 on: September 16, 2022, 11:43:45 PM »
Ok can confirm you can get the oil pan off from underneath, although I'm not sure it is easier than pulling the engine. ;D

remove all oil pan bolts
remove lower motor mounts, I have the top passenger one already off from head/timing belt removal
jacked up engine/trans with board under the trans until the lower motor mount bolts pass the brace they run through
drop exhaust
From here the pan comes right off

Logged