TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

If you've registered make sure emails from TeamCapri are not landing in your spam folder!

Author Topic: Starter motor question  (Read 2139 times)

blchicago

  • Newbie
  • *
  • Posts: 17
    • 1991 Capri, xTerra, Sonic
Starter motor question
« on: August 15, 2014, 10:16:32 PM »
Pulling out a starter motor.

Do you need to remove the engine bracket immediately in from of the motor?

https://www.flickr.com/photos/35224322@N04/14931501565/

Looks like it, but thought it's worth asking beforehand. If so, is the two at the bottom of the bracket enough?

TIA, Bill and Carter
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5494
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: Starter motor question
« Reply #1 on: August 15, 2014, 10:24:06 PM »
I believe so. If not, it will at least make the job much easier. There's two 14mm bolts from the top, too - through the back of intake manifold
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"