This is not necessarily a build thread but more of a motivational tracker to keep me going through the winter months. I have a 1993 XR2 with 41,000 original miles that other than a few maintenance items like fuel filter and belts it's all original. It's the car to the left in the picture. Then I have a 1991 XR2 that I'm going to modify the crap out of. It's fluid and nothing set in stone at this time bit first and foremost is mechanical. I've already replaced all the filters, shifter bushings, both CV axles, water pump, timing belt, radiator, cooling fan switch, valve cover and timing cover gaskets, plugs, wires, cap and rotor, battery, center console, door speakers, and head unit.
Next on agenda is complete brake overhaul to include all calipers (still need to find a right rear) brake hoses, rotors, pads, bearings, seals, and fluid flush.
Then all four struts with the 2" lowering springs.
Then I'll be ripping out the stock fuel tank, straps, and filler neck and replacing it with a 8 gallon fuel cell mounted in the trunk. Once this is completed I'll be shaving the fuel door.
Then door poppers and shaving handles and key locks on doors.
Then I'm either going to have hood, headlight doors, hardtop, trunk lid, and spoiler wrapped in carbon fiber or plasti-dipped in Black.
Plan on running a stainless exhaust pipe with a small muffler from manifold and have it dump behind passenger front tire.
Removing back seat for weight savings
And many other things clanging around in my skull
https://photos.app.goo.gl/vEQnyVkfSQTi1wZF7https://photos.app.goo.gl/azdCfZWofAWrLEAC7