After finding no information on the internet about removing a Capri door panel and having some difficulty doing it, I will add... The panel would not simply just pull up for me after removing the screws because of tight clips in the top plastic trim next to the window. The top of the door panel in my car is sandwiched in the black top trim piece and I had to pull it out towards the interior at a right angle. The black colored long piece of trim is a "C" shape (cross section) that snugly holds the top of the door panel with tension. Reassemble by forcing the top of the panel carefully into the trim, reattach the electric motor harness, reinsert door latch through its hole, and rescrew. I hope this may help someone else.