TeamCapri
Tech, Repairs, Upgrades => Capri XR-2 89-94 => Topic started by: Aus Capri on May 16, 2020, 08:02:49 AM
-
Hi I'm pulling my motor to do clutch, piston rings, gaskets and front/rear seals, I have read rocketman's run-down on how to pull the motor, though I am concerned about the part where he says if when you remove the intermediate shaft, to wire up the spider gears in the diff with wire.
My question is can I take the gearbox of the motor whilst keeping the intermediate shaft still in the gearbox as to not need to worry about dropping the gears inside the gearbox?
Rocketman🚀 thank you for the run down on how to pull the motor it will help me heaps! You are the man!
-
Yeah, he's the man.
-
Hah, no problem. Yes I believe you can leave the int. shaft in the transmission but it makes it a bit unwieldy