TeamCapri
General => Photographs => Topic started by: BiPoBro on February 16, 2017, 03:34:28 PM
-
Well, I managed to find a couple pictures of my Capri before I started working on it (Since I don't have any right now :P ). This is a field find Capri XR2 in the state it was rescued in September 2016. The car belonged to a friend's parents who parked it up over 8 years ago, and their cost for the car was "get it out of the yard." I'll definitely get more pictures when I can. Also, massive thanks to my friends that are helping me with this project as I would be completely lost without them.
Currently this car is at 105k miles and is both being daily driven and being turned into a little autocross car. I hope to drive this thing for a long while.
(http://i.imgur.com/Pl1iEdR.jpg)
(http://i.imgur.com/sM2ylcV.jpg)
(http://i.imgur.com/tCc1fBp.jpg)
-
Looks like great for how long its been sitting.
Are those heat extractors/vents or is that just a
vinyl/paint?
Good luck fixing the header panel its alot of work, but in the end its well worth it.
I run auto-x aswell and I regulary beat Miatas and similar cars. The only cars that beat me are turbo Miatas, and the like. I recommend getting a 26mm rear antisway bar, Exel G struts, drop springs/Ground Control coilovers, poly bushings, front and rear strut bars.
The only mod I dont have out of those are the coilovers and thats going to be fixed soon. My car has very little body roll and handles like a dime. I need to upgrade my wheels and tires to 16x7 and 205s that should help alot.
-
That is an unbelievable find, good luck with it.
Jack Byrd
-
WashiestSnake, if you're referring to the black stripes on the hood, those are just paint. In the very early stages of the project, (See: before the engine was running) one of my buddies decided that we needed speed stripes and I said why not :)
As for the suspension, the plan is to take care of that after we get the engine squared away. The turbo is in need of a rebuild and the factory boost recycling doesn't work so the motor likes to try and overboost. I also need to get new wheels for the thing, the base model Capri wheels just aren't cool enough :P
-
Paint the wheels black and put a red stripe around the outside edge to dress them up while you're working on everything else.
Jack Byrd