[quote author=EShepherd
The easiest way to get to the ECT sensor depends on if you have a lift/a good jack and two jack stands. If you do, I find it much easier to get to it from underneath the car. Don't even need to pull the whole intake manifold off. What I did was picked it up, removed the catalytic converter, removed the throttle body bracket, and removed the starter motor. That'll give you juuuuust enough room to get to the sensor, but you'll likely take a bit of a coolant shower doing it from below.
If you don't wanna climb under the car, it is possible from up top, just much more of a pain. I forget what all I had to remove, but I want to say it's the battery, battery tray, alternator, and intake manifold.
[/quote]
I thought I replaced this but I definitely didn't do any of that.... hmmm