Tech, Repairs, Upgrades > Engine & Drivetrain Swaps
BP Swap
Pavelovable92:
The TPS I have completely rewired by using the original plug.
For the VAF I used the original plug, I only changed the pins and spliced the GND on pin 2 and 3. And I cut off the yellow/green wire, as you wrote down in your dokumentation.
And the ECU is also completely rewired.
I didn't wire up the variable intake solenoid yet, because I don't quite know, where it is located.
Pavelovable92:
Update:
The mercury bp swap is now running perfectly! The throttle wasn't closed, so a little air got into the intake and the motor was running to the limiter. Now it is fixed and everything is running very well.
The next days I will get the wiring a little bit more beautiful and then the time is coming to take a ride!
Navigation
[0] Message Index
[*] Previous page
Go to full version