TeamCapri

Classifieds => Capri Parts => Topic started by: Gaz on August 21, 2015, 10:57:45 AM

Title: 91 5spd parting out in Duluth, MN
Post by: Gaz on August 21, 2015, 10:57:45 AM: Yes, I still have it because reasons.

For sale: anything I don't pull from this 1991 Capri for myself, it's all together for now. WHEELS AND TIRES ARE THE THREE SPOKE XR2s with hardly used kumho ecstas on them. It is in Duluth, MN.

It's basically whole, body's got dings, motor just needs timing set and it should run, 94k on it. It did when I parked it a year and a half ago.
Tranny is fine, albeit worn synchros due to rev-matching when the clutch master cylinder shit the bed, new one installed like three years ago. 125k.
Does have black hard top, headliner is sagging.
Interior is grey cloth, was a smoker, stains damn near everywhere.

I'll post pictures sometime this week, and edit this post to reflect parts sold or missing.

$10 Deposit for anything I pull for you.

PICTURES:
http://s1313.photobucket.com/user/Garret_Lee_Rombal/library/Mobile%20Uploads?sort=3&src=pb&page=1 (http://s1313.photobucket.com/user/Garret_Lee_Rombal/library/Mobile%20Uploads?sort=3&src=pb&page=1)

BONUS PARTS I JUST FOUND! (4/10/15)

XR2 Distributor
N/A Distributor
Intake Manifold
Throttle Body
Injectors
Flywheel
Fuel Injection Rail
Upper Timing Cover

PARTS GONE OR SOLD:
Glovebox door - BROKEN HANDLE
Fuel tank - Sold
Alternator - Sold
Luggage Rack - Sold
Passenger seat - Sold
Distributor - Sold
Front lenses - Sold
Center caps - Sold
Headlight Switch - Sold
Defroster switch - Sold
Map pockets - Sold
Headlight assemblies - Sold
Windshield Weatherstripping - Sold
Antenna w/Bezel - Sold
Center Caps - Sold
Brake Master Cylinder Cap - Sold
Title: Re: Parts or whole car for sale. $750 for whole.
Post by: Gaz on August 30, 2015, 11:51:14 AM: Fuel tank was sold, pictures added.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: CapriTypeR on August 30, 2015, 12:26:02 PM: PM sent...
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on August 31, 2015, 10:44:13 AM: How much for the throttle body and jack?

Thanks, Jack Byrd
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on August 31, 2015, 11:25:05 AM: $50 sound good?

Quote from: greywolf27030 on August 31, 2015, 10:44:13 AM
How much for the throttle body and jack?

Thanks, Jack Byrd
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on September 02, 2015, 08:53:09 AM: Thanks, another member was going to sell those to me, but I haven't been able to get in touch with him. I'll get back to you shortly.

Jack
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on September 03, 2015, 10:54:32 PM: Fuel Tank, luggage rack and passenger seat sold.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on September 06, 2015, 05:24:18 PM: Hi Gaz, heard back from the other member and we're still on. He's been on vacation. I'll get back with you if there is anything else, good luck on selling your parts.

Jack
Title: Re: 91 5spd parting out in Duluth, MN
Post by: MrBokaLokaDoka on September 18, 2015, 02:54:29 PM: How much are you asking for a front knuckle?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on September 18, 2015, 03:11:31 PM: Quote from: MrBokaLokaDoka on September 18, 2015, 02:54:29 PM
How much are you asking for a front knuckle?

$35
Title: Re: 91 5spd parting out in Duluth, MN
Post by: MrBokaLokaDoka on September 18, 2015, 03:14:12 PM: including shipping?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on September 18, 2015, 03:18:52 PM: Where to?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on September 26, 2015, 02:50:10 PM: SHELL WILL BE GONE IN TWO WEEKS

SPEAK NOW OR FOREVER HOLD YOUR PEACE
Title: Re: 91 5spd parting out in Duluth, MN
Post by: mitch1204 on September 26, 2015, 10:10:16 PM: My ignition module quit tonight. How much for the whole distributor assembly? I like to have a backup.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on September 27, 2015, 08:02:05 AM: Is the clock and headlight switch any good, if so, how much?

Thanks, Jack
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on September 27, 2015, 08:47:27 AM: Quote from: mitch1204 on September 26, 2015, 10:10:16 PM
My ignition module quit tonight. How much for the whole distributor assembly? I like to have a backup.

Pm'd

Quote from: greywolf27030 on September 27, 2015, 08:02:05 AM
Is the clock and headlight switch any good, if so, how much?

Thanks, Jack

Headlight switch is spoken for, $20 for the clock shipped.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on September 27, 2015, 04:42:37 PM: Thanks, Jack
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 01, 2015, 12:21:31 AM: All kinds of shit sold.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: mitch1204 on October 01, 2015, 05:02:45 AM: Quote from: Gaz on October 01, 2015, 12:21:31 AM
All kinds of shit sold.

You sold the driver's seat?? Lol: )
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 01, 2015, 08:34:36 AM: Well, no. every time I sell something I edit the original post to reflect the changes. so, no the driver seat is not been sold. :-)
Title: Re: 91 5spd parting out in Duluth, MN
Post by: mitch1204 on October 01, 2015, 05:56:32 PM: Old truck driver joke.

How much for the injectors? I might be interested in them too.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: masguy on October 01, 2015, 09:19:33 PM: Does it have a defogger switch?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 02, 2015, 12:22:00 PM: Quote from: mitch1204 on October 01, 2015, 05:56:32 PM
Old truck driver joke.

How much for the injectors? I might be interested in them too.

$90 for all for, shipped.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 02, 2015, 12:23:05 PM: Quote from: masguy on October 01, 2015, 09:19:33 PM
Does it have a defogger switch?

Defog switch is sold.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: mitch1204 on October 02, 2015, 08:07:02 PM: Quote from: Gaz on October 02, 2015, 12:22:00 PM

$90 for all for, shipped.

That'll have to wait until next month if you still have them. Thanks for the distributor, I'm back up and running.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 02, 2015, 09:21:05 PM: That'll be fine. Glad to hear!
Title: Re: 91 5spd parting out in Duluth, MN
Post by: chrispoe on October 08, 2015, 05:29:43 PM: PM sent
Title: Re: 91 5spd parting out in Duluth, MN
Post by: 96rsstbrwd on October 21, 2015, 10:50:01 AM: I need a valve cover. Willing to sell? And how much shipped to 29526?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on October 21, 2015, 11:22:44 AM: Hey Gaz, hot much for the two custom tapered tension nut that attach the cables on the convertible top at the a bottom of the a pillar?

Jack Byrd
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 21, 2015, 11:34:16 AM: Quote from: 96rsstbrwd on October 21, 2015, 10:50:01 AM
I need a valve cover. Willing to sell? And how much shipped to 29526?

$25 plus shipping? Whatever seems reasonable to you.
Quote from: greywolf27030 on October 21, 2015, 11:22:44 AM
Hey Gaz, hot much for the two custom tapered tension nut that attach the cables on the convertible top at the a bottom of the a pillar?

Jack Byrd
They might be shot...I'll have a look and get back to you.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Twinthrill on October 24, 2015, 11:26:31 AM: How much for the knockbox? Shipped to 40215
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 24, 2015, 11:35:35 AM: Where is that again, and what does it look like?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Twinthrill on October 24, 2015, 05:47:22 PM: The knockbox is a black box on the passenger side, right in front of the strut tower. It has a long cable that snakes around and plugs into the main engine harness on the firewall with a round black plug.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 24, 2015, 10:21:19 PM: And the NA models have these?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: chrispoe on October 25, 2015, 06:03:10 AM: The NA's don't have them.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Twinthrill on October 26, 2015, 01:51:03 PM: Sorry thought you had the XR2 model
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on November 02, 2015, 06:57:11 PM: Negative, ghost rider.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on January 04, 2016, 12:26:28 PM: Quote from: Gaz on October 21, 2015, 11:34:16 AM
Quote from: 96rsstbrwd on October 21, 2015, 10:50:01 AM
I need a valve cover. Willing to sell? And how much shipped to 29526?

$25 plus shipping? Whatever seems reasonable to you.
Quote from: greywolf27030 on October 21, 2015, 11:22:44 AM
Hey Gaz, hot much for the two custom tapered tension nut that attach the cables on the convertible top at the a bottom of the a pillar?

Jack Byrd
They might be shot...I'll have a look and get back to you.

those tension nuts are shot.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: greywolf27030 on January 04, 2016, 12:52:35 PM: Thanks for checking. Hope you had good holidays. We're having your weather down here in Carolina this week, wind chill 25, wish up luck.

Jack
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on March 30, 2016, 12:49:28 PM: Car's still in my yard folks.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Merlin on April 22, 2016, 12:26:36 PM: Does your 91 have the large or small rotors in the front? If you have the large rotors, how much would you charge for the passenger side steering knuckle, shipped to Miami?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on April 22, 2016, 12:28:42 PM: Quote from: Merlin on April 22, 2016, 12:26:36 PM
Does your 91 have the large or small rotors in the front? If you have the large rotors, how much would you charge for the passenger side steering knuckle, shipped to Miami?

are you asking if it had the big brake upgrade done? it has not, so it has the stock rotors on it, which are garbage. I do, however, have two replacement OE front rotors I could send you.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Merlin on April 22, 2016, 02:43:07 PM: Some of the 91 N/A's came with a smaller rotor. It could have a 9.375 rotor or the 10.25 rotor. The 10.25 rotor is the same rotor used on the XR2s. The knuckles made for the smaller rotor will not work with the larger rotor, the caliper bottoms out before it reaches the mounting ears on the knuckle. Does your N/A use the larger XR2 rotor?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on April 22, 2016, 06:51:40 PM: They are all three the larger xr2 rotors.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Merlin on April 25, 2016, 02:33:09 AM: Great. How much do you want for the knuckle with shipping to Miami zip code 33187?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on April 25, 2016, 09:08:42 AM: The wheel bearing on it is bad, still want it?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Merlin on April 27, 2016, 09:47:10 AM: As long as the knuckle is good yes I would like to get it. I already have a brand new hub, pre load spacer, and rotor for it and the bearings are one of the parts that I can actually get her in Miami.
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on April 27, 2016, 09:48:09 AM: Pm sent
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Racer_X on April 28, 2016, 03:50:16 PM: I see on the first page that you sold the alternator. Do you still have the alternator bracket?
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on April 28, 2016, 05:16:35 PM: Yes, it is still there!
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on May 18, 2016, 09:14:15 AM: fuck

Car will be scrapped on June first, 2017
Title: Re: 91 5spd parting out in Duluth, MN
Post by: Gaz on October 04, 2016, 10:18:32 AM: I know some people tried to get a hold of me for parts in September, I was away. Please message again if you were one of them