TeamCapri

Tech, Repairs, Upgrades => Aftermarket => Topic started by: rcicustoms on May 28, 2009, 03:27:00 PM

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 28, 2009, 03:27:00 PM

(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar1.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar2.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar3.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar5.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar6.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/tonneaucover.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar7.jpg)
 (http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar4.jpg)

i had a whole writeup, but it had 9 pics and the stupid board threw it out, so heres the pics yall wanted, but im tired of typing so if you want to know something just ask...Joe

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 28, 2009, 03:55:00 PM

do theese help yall ???

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 28, 2009, 06:05:00 PM

Bumpin on up ,to the topside....LOL

Title: how to : miata style bar / rollbar
Post by: Heavensheros on May 28, 2009, 06:10:00 PM

That looks real nice very hepful but i went into a different direction and i will let you all know how it turned out.

Title: how to : miata style bar / rollbar
Post by: Heavensheros on May 28, 2009, 06:23:00 PM

Also RCI where and how did you mount those seats. Ive been looking around for seats but cant figure out how to mount them.

Title: how to : miata style bar / rollbar
Post by: JackRobot on May 28, 2009, 06:39:00 PM

Very nice, prob the route I'll take.   :cool:

Title: how to : miata style bar / rollbar
Post by: Gostlrs on May 29, 2009, 02:11:00 AM

if you ger the universal sliders they will fit on the cross memebers, just drill and bolt in. thats what i did with mine. if you had welding skills you could easily remove the ends where the factory bolts go through and have them welded on so you can use the factory bolts. something i might do later on next time i get some welding done.

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 29, 2009, 11:48:00 AM

hit it on the head gost ...universal sliders and i fabed some feet for em and welded em up....

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 29, 2009, 11:49:00 AM

hit it on the head gost ...universal sliders and i fabed some feet for em and welded em up....

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 29, 2009, 11:50:00 AM

hit it on the head gost ...universal sliders and i fabed some feet for em and welded em up....

Title: how to : miata style bar / rollbar
Post by: Heavensheros on May 29, 2009, 04:07:00 PM

How much of a difference does that air dam make at the roll bar ?

Title: how to : miata style bar / rollbar
Post by: rcicustoms on May 29, 2009, 08:05:00 PM

its noticeable at highway speeds ...i had it on the car a while before i bought the rollbar...

Title: how to : miata style bar / rollbar
Post by: Gostlrs on May 30, 2009, 05:03:00 PM

i felt a big difference when i put on my bubble cover as well. i put my windows up about 1/4 the way and the wind in the cab in very minimal. i can even talk on the cell phone with the top down

Title: how to : miata style bar / rollbar
Post by: Rocketman on May 18, 2011, 01:44:00 PM

Bumping this for the guy who was looking for the bracket design