TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: End Link  (Read 1909 times)

sterling94capri

  • Full Member
  • ***
  • Posts: 207
End Link
« on: April 24, 2011, 03:32:00 AM »
One of my rear end link sway bar bushings is crumbling,the others don't look real stout either.Anybody know which energy suspension part I need for a 94 xr2?Thanks Rocky
Logged

tonlaw71

  • Administrator
  • Sr. Member
  • *****
  • Posts: 493
    • 1992 XR2 and a 2013 Nissan Juke
End Link
« Reply #1 on: April 24, 2011, 07:49:00 PM »
Hey Rocky,

Are you looking just for the bushings, or the whole kit?

Here are the kits I used on my 91 NA and my 91 XR2. I had to modify them for the front on the XR2 because the end of the sway bar was rubbing the half shaft when I turned the wheel, but they still work great.

Energy suspension part # 9.8125 (available with black or red bushings)

Hope this helps.
Logged
///Tony aka Bubba Gumpshrimp\\\

///'92 Plasti-Dipped XR2\\\

sterling94capri

  • Full Member
  • ***
  • Posts: 207
End Link
« Reply #2 on: April 25, 2011, 07:21:00 AM »
I was hoping for the end link kit for the rear sway bar.Did that p# fit your rear with out mod?thanks Rocky
Logged

tonlaw71

  • Administrator
  • Sr. Member
  • *****
  • Posts: 493
    • 1992 XR2 and a 2013 Nissan Juke
End Link
« Reply #3 on: April 25, 2011, 11:07:00 AM »
They were a little tight in the rear, but once I got em in and tightened down, they were perfect. No mods needed.
Logged
///Tony aka Bubba Gumpshrimp\\\

///'92 Plasti-Dipped XR2\\\