April 29, 2024, 01:55:18 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
If you've registered make sure emails from TeamCapri are not landing in your spam folder!
Home
Help
Search
Login
Register
TeamCapri
>
General
>
Photographs
>
Custom Foglight Install
« previous
next »
Pages: [
1
]
Print
Author
Topic: Custom Foglight Install (Read 2550 times)
Xodus989
Newbie
Posts: 15
Custom Foglight Install
«
on:
August 12, 2008, 03:09:00 PM »
Well, I decided I didn't want to spend 170 bucks + shipping on a stock foglight kit from MCM so I went and picked up my own kit from the store. I haven't had a chance to fire them up yet since I need a bandsaw or dremel to cut the screws down so they fit back in. But what I did was take the intake port looking thing that pops out, and mounted them to that. I had to cut out the fins, but that was fairly simple, then I had to put the holes in it BY HAND since my dad brought the drill to work instead of leaving at home where it's supposed to be.
Here's some BIG pics. So click on them
The casing, and the hacksaw blade I used to cut.
http://softmodfiles.net/images/capri/light/GEDC0486.JPG
Close up of after I cut + the removed fins
http://softmodfiles.net/images/capri/light/GEDC0487.JPG
Holes, the one on the right I started in the wrong spot
http://softmodfiles.net/images/capri/light/GEDC0488.JPG
The lights that are going in
http://softmodfiles.net/images/capri/light/GEDC0489.JPG
Final Holes
http://softmodfiles.net/images/capri/light/GEDC0490.JPG
SCREWED ON! You can see here where I need to cut the rest of the bolt / screw
http://softmodfiles.net/images/capri/light/GEDC0491.JPG
http://softmodfiles.net/images/capri/light/GEDC0492.JPG
This is how sort of how it will look once it's mounted all the way in. The screws stop me from snapping it all the way in, so it WILL be flush when it's done.
http://softmodfiles.net/images/capri/light/GEDC0493.JPG
http://softmodfiles.net/images/capri/light/GEDC0494.JPG
Logged
spiro
Full Member
Posts: 136
Custom Foglight Install
«
Reply #1 on:
August 17, 2008, 08:01:00 PM »
Good luck with that install mate, hope all goes well.
Logged
spiro - 1989 SA Ford Capri
Xodus989
Newbie
Posts: 15
Custom Foglight Install
«
Reply #2 on:
August 20, 2008, 07:24:00 AM »
Got them installed and semi-wired. Not neat yet since I'm going to be getting a switch panel.
But they look nice
Logged
Print
Pages: [
1
]
« previous
next »
TeamCapri
>
General
>
Photographs
>
Custom Foglight Install