TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

If you've registered make sure emails from TeamCapri are not landing in your spam folder!

Author Topic: A/C blower connection  (Read 2453 times)

mcanchola2

  • Full Member
  • ***
  • Posts: 107
A/C blower connection
« on: August 06, 2011, 06:29:00 AM »
ive notice that if i bypass this the blower turns faster in all the speeds do i really need this
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5493
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
A/C blower connection
« Reply #1 on: August 06, 2011, 06:51:00 AM »
The blower resistor pack is on the upper right side of your pic there, screwed into the blower housing.

I would say don't bypass it - the extra current may melt the selector switch in the dash. I have had to replace one switch already that was damaged from melting
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


mcanchola2

  • Full Member
  • ***
  • Posts: 107
A/C blower connection
« Reply #2 on: August 06, 2011, 08:46:00 AM »
ok i see but whats that black thing thats being held just below the resistors, im asking this cuz the previous capri i had didnt have this and the single blue wire that goes between the resistor pack actually had a connector that plugged into that one single blade socket thats there on the resistor pack
Logged