TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: Custom Foglight Install  (Read 2543 times)

Xodus989

  • Newbie
  • *
  • Posts: 15
    • http://xoduslive.net
Custom Foglight Install
« on: August 12, 2008, 03:09:00 PM »
Well, I decided I didn't want to spend 170 bucks + shipping on a stock foglight kit from MCM so I went and picked up my own kit from the store. I haven't had a chance to fire them up yet since I need a bandsaw or dremel to cut the screws down so they fit back in.  But what I did was take the intake port looking thing that pops out, and mounted them to that.  I had to cut out the fins, but that was fairly simple, then I had to put the holes in it BY HAND since my dad brought the drill to work instead of leaving at home where it's supposed to be.

Here's some BIG pics. So click on them  ;)

The casing, and the hacksaw blade I used to cut.
http://softmodfiles.net/images/capri/light/GEDC0486.JPG

Close up of after I cut + the removed fins
http://softmodfiles.net/images/capri/light/GEDC0487.JPG

Holes, the one on the right I started in the wrong spot  ;)
http://softmodfiles.net/images/capri/light/GEDC0488.JPG

The lights that are going in
http://softmodfiles.net/images/capri/light/GEDC0489.JPG

Final Holes
http://softmodfiles.net/images/capri/light/GEDC0490.JPG

SCREWED ON! You can see here where I need to cut the rest of the bolt / screw
http://softmodfiles.net/images/capri/light/GEDC0491.JPG
http://softmodfiles.net/images/capri/light/GEDC0492.JPG

This is how sort of how it will look once it's mounted all the way in. The screws stop me from snapping it all the way in, so it WILL be flush when it's done.
http://softmodfiles.net/images/capri/light/GEDC0493.JPG
http://softmodfiles.net/images/capri/light/GEDC0494.JPG
Logged

spiro

  • Full Member
  • ***
  • Posts: 136
    • http://N/a
Custom Foglight Install
« Reply #1 on: August 17, 2008, 08:01:00 PM »
Good luck with that install mate, hope all goes well.

 
Logged
spiro - 1989 SA Ford Capri

Xodus989

  • Newbie
  • *
  • Posts: 15
    • http://xoduslive.net
Custom Foglight Install
« Reply #2 on: August 20, 2008, 07:24:00 AM »
Got them installed and semi-wired. Not neat yet since I'm going to be getting a switch panel.

But they look nice  
Logged