TeamCapri
Classifieds => Capri Parts => Topic started by: shoeish on November 15, 2010, 06:02:00 PM
-
I need an XR2 Exhaust manifold. Anyone have one? Mine cracked.
-
Most of them are cracked. It does not effect anything, usually.
-
That's good to know. I had mine repaired by a very experienced welder.
-
Regarding this, don't the XR2 and N/A use the same manifold? The only difference being the resonator in place of the turbo.
-
nooooooo N/A uses a very large castiron manifold that goes all the way down to the downpipe. Totally different.
Only resonators are in the exhaust tunnel (both cars)
-
But my 1991 shop manual shows it as just having a resonator there in place of the turbo, you're saying it goes from the exhaust side all the way to the catalytic converter in a single piece, how the heck could you change that ever.
-
No, I'm saying both cars have a resonator after the cat. The N/A does not have a resonator there, what shop manual do you have that shows this? N/A manifold goes directly to a downpipe similar to that of a turbo, and then to the cat.
-
Turbo manifold w/ VJ11
(http://www.werbatfik.com/img/capriwork/capriwork137.jpg)
N/A Manifold (ugly and rusted lol)...
(http://www.werbatfik.com/uplimg/namanifold.jpg)
-
i have a custom b6t manifold (triple "Y") to fit a dsm 14b turbo...turbo not included
pictures at:
http://www.fordfestiva.com/forums/showthread.php?t=29518 (http://www.fordfestiva.com/forums/showthread.php?t=29518)
-
I'd be interested in that manifold if thread owner isn't. Hit me up on Fordfestiva.com or here! (http://smile.gif)