TeamCapri
Classifieds => Capri Parts => Topic started by: Gaz on August 21, 2015, 10:57:45 AM
-
Yes, I still have it because reasons.
For sale: anything I don't pull from this 1991 Capri for myself, it's all together for now. WHEELS AND TIRES ARE THE THREE SPOKE XR2s with hardly used kumho ecstas on them. It is in Duluth, MN.
It's basically whole, body's got dings, motor just needs timing set and it should run, 94k on it. It did when I parked it a year and a half ago.
Tranny is fine, albeit worn synchros due to rev-matching when the clutch master cylinder shit the bed, new one installed like three years ago. 125k.
Does have black hard top, headliner is sagging.
Interior is grey cloth, was a smoker, stains damn near everywhere.
I'll post pictures sometime this week, and edit this post to reflect parts sold or missing.
$10 Deposit for anything I pull for you.
PICTURES:
http://s1313.photobucket.com/user/Garret_Lee_Rombal/library/Mobile%20Uploads?sort=3&src=pb&page=1 (http://s1313.photobucket.com/user/Garret_Lee_Rombal/library/Mobile%20Uploads?sort=3&src=pb&page=1)
BONUS PARTS I JUST FOUND! (4/10/15)
XR2 Distributor
N/A Distributor
Intake Manifold
Throttle Body
Injectors
Flywheel
Fuel Injection Rail
Upper Timing Cover
PARTS GONE OR SOLD:
Glovebox door - BROKEN HANDLE
Fuel tank - Sold
Alternator - Sold
Luggage Rack - Sold
Passenger seat - Sold
Distributor - Sold
Front lenses - Sold
Center caps - Sold
Headlight Switch - Sold
Defroster switch - Sold
Map pockets - Sold
Headlight assemblies - Sold
Windshield Weatherstripping - Sold
Antenna w/Bezel - Sold
Center Caps - Sold
Brake Master Cylinder Cap - Sold
-
Fuel tank was sold, pictures added.
-
PM sent...
-
How much for the throttle body and jack?
Thanks, Jack Byrd
-
$50 sound good?
How much for the throttle body and jack?
Thanks, Jack Byrd
-
Thanks, another member was going to sell those to me, but I haven't been able to get in touch with him. I'll get back to you shortly.
Jack
-
Fuel Tank, luggage rack and passenger seat sold.
-
Hi Gaz, heard back from the other member and we're still on. He's been on vacation. I'll get back with you if there is anything else, good luck on selling your parts.
Jack
-
How much are you asking for a front knuckle?
-
How much are you asking for a front knuckle?
$35
-
including shipping?
-
Where to?
-
SHELL WILL BE GONE IN TWO WEEKS
SPEAK NOW OR FOREVER HOLD YOUR PEACE
-
My ignition module quit tonight. How much for the whole distributor assembly? I like to have a backup.
-
Is the clock and headlight switch any good, if so, how much?
Thanks, Jack
-
My ignition module quit tonight. How much for the whole distributor assembly? I like to have a backup.
Pm'd
Is the clock and headlight switch any good, if so, how much?
Thanks, Jack
Headlight switch is spoken for, $20 for the clock shipped.
-
Thanks, Jack
-
All kinds of shit sold.
-
All kinds of shit sold.
You sold the driver's seat?? Lol: )
-
Well, no. every time I sell something I edit the original post to reflect the changes. so, no the driver seat is not been sold. :-)
-
Old truck driver joke.
How much for the injectors? I might be interested in them too.
-
Does it have a defogger switch?
-
Old truck driver joke.
How much for the injectors? I might be interested in them too.
$90 for all for, shipped.
-
Does it have a defogger switch?
Defog switch is sold.
-
$90 for all for, shipped.
That'll have to wait until next month if you still have them. Thanks for the distributor, I'm back up and running.
-
That'll be fine. Glad to hear!
-
PM sent
-
I need a valve cover. Willing to sell? And how much shipped to 29526?
-
Hey Gaz, hot much for the two custom tapered tension nut that attach the cables on the convertible top at the a bottom of the a pillar?
Jack Byrd
-
I need a valve cover. Willing to sell? And how much shipped to 29526?
$25 plus shipping? Whatever seems reasonable to you.
Hey Gaz, hot much for the two custom tapered tension nut that attach the cables on the convertible top at the a bottom of the a pillar?
Jack Byrd
They might be shot...I'll have a look and get back to you.
-
How much for the knockbox? Shipped to 40215
-
Where is that again, and what does it look like?
-
The knockbox is a black box on the passenger side, right in front of the strut tower. It has a long cable that snakes around and plugs into the main engine harness on the firewall with a round black plug.
-
And the NA models have these?
-
The NA's don't have them.
-
Sorry thought you had the XR2 model
-
Negative, ghost rider.
-
I need a valve cover. Willing to sell? And how much shipped to 29526?
$25 plus shipping? Whatever seems reasonable to you.
Hey Gaz, hot much for the two custom tapered tension nut that attach the cables on the convertible top at the a bottom of the a pillar?
Jack Byrd
They might be shot...I'll have a look and get back to you.
those tension nuts are shot.
-
Thanks for checking. Hope you had good holidays. We're having your weather down here in Carolina this week, wind chill 25, wish up luck.
Jack
-
Car's still in my yard folks.
-
Does your 91 have the large or small rotors in the front? If you have the large rotors, how much would you charge for the passenger side steering knuckle, shipped to Miami?
-
Does your 91 have the large or small rotors in the front? If you have the large rotors, how much would you charge for the passenger side steering knuckle, shipped to Miami?
are you asking if it had the big brake upgrade done? it has not, so it has the stock rotors on it, which are garbage. I do, however, have two replacement OE front rotors I could send you.
-
Some of the 91 N/A's came with a smaller rotor. It could have a 9.375 rotor or the 10.25 rotor. The 10.25 rotor is the same rotor used on the XR2s. The knuckles made for the smaller rotor will not work with the larger rotor, the caliper bottoms out before it reaches the mounting ears on the knuckle. Does your N/A use the larger XR2 rotor?
-
They are all three the larger xr2 rotors.
-
Great. How much do you want for the knuckle with shipping to Miami zip code 33187?
-
The wheel bearing on it is bad, still want it?
-
As long as the knuckle is good yes I would like to get it. I already have a brand new hub, pre load spacer, and rotor for it and the bearings are one of the parts that I can actually get her in Miami.
-
Pm sent
-
I see on the first page that you sold the alternator. Do you still have the alternator bracket?
-
Yes, it is still there!
-
fuck
Car will be scrapped on June first, 2017
-
I know some people tried to get a hold of me for parts in September, I was away. Please message again if you were one of them