Filled motor mount how-to:
Here's the stuff I used, 3M Windo Weld, $15.02 at Advance:
Virgin Mounts:
Masked off, I used duct tape because the amsking tape didn't stick
This is the front/bottom mount, this has the biggest voids, so I started here first
Blurry, sorry. This is the passenger side mount, there weren't many void spots here so I just sort of went crazy, lol
both mounts filled and setting.
A few tips: The urethane is ridiculously hard to get out of the bottle, I was squeezing the caulk gun with both hands. You will get it all over your hands and it is almost impossible toget off. I saoked my hands in simple green 3 times, washed with dish soap, washed with goop, washed with hand soap, dish soap again and simple green again and I still have it all over, tomorrow I'm going to try gas and wd-40; just be warned.
ANd for fun, my dad started to install a wb02 while I was at work:
http://farm3.static.flickr.com/2247/2287788926_69242525b9.jpg?v=0