TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: part name  (Read 2805 times)

manuel

  • Newbie
  • *
  • Posts: 32
part name
« on: July 25, 2010, 05:51:00 PM »
what is the name or part # of the valve on the firewall to the fuel regulator? the people at autozone don't know what it is
Logged
manuel r

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5493
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
part name
« Reply #1 on: July 25, 2010, 07:19:00 PM »
Its just a solenoid valve... it closes when the engine is re-started hot to keep fuel pressure up. Its not really a critical part, is it giving you problems?
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


bhazard

  • Sr. Member
  • ****
  • Posts: 337
part name
« Reply #2 on: July 26, 2010, 05:06:00 AM »
Ditch it and run vac source straight to the regulator, you'll be fine.
Logged
93 Festiva L, lotsa miles, BP+T/G25MR swap, Rocketchip
Best ET 12.99, Best MPH 109.8, 22\\" slicks
88 T-bird Turbo Coupe, 182k miles, slightly modded, 14.71 @ 92.4mph 2.02 60\\\', end of the road

manuel

  • Newbie
  • *
  • Posts: 32
part name
« Reply #3 on: July 26, 2010, 03:02:00 PM »
it was giving me problems it ran for 10 min. then died after a day it started for another ten min. i was checking the grounds and vacum hoses i tried to pull the hose that goes to the top of it and brocke the niple i unpluged the whole thing sprayed starter fluid and run good with out it.
Logged
manuel r

drbob

  • Old-Timer
  • *****
  • Posts: 1367
part name
« Reply #4 on: July 27, 2010, 07:24:00 AM »
manuel, how did those lambo hinges word???  The Capri world is waiting to know.
Logged
Mid-America Capri Gathering Founder/Team Capri Moderator
--------------------------

1994 Mercury Capri made in AUSTRALIA
AUSTRALIAN Cattle dog/brittney mix
AUSTRALIAN Shepherd
Is anyone else sensing a pattern?

manuel

  • Newbie
  • *
  • Posts: 32
part name
« Reply #5 on: July 27, 2010, 04:42:00 PM »
drbob     i had to buy some equipment to make them my self to sell them at a better price i still need a mill/lathe combo to do it faster and,i just moved  and i found out i dont have 220v anywhere but im still working on making some  ill send u a private message to let you know a bout the price  i think russ wants to sell them im not sure but ill work something up with you.
Logged
manuel r