TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: Hubs  (Read 2416 times)

Phillip

  • Full Member
  • ***
  • Posts: 218
Hubs
« on: April 11, 2010, 09:52:00 AM »
So I made a tool for pressing out the hubs on this little monster and when I pulled one of my spares apart I found some Bass Turd had replaced the bearings and had deleted the spacer 9hence the necessity to replace the bearings).

The question I have is there a process for determining the thickness of the space that anyone knows of?? I have some new spacers and could replace the missing one if I knew the thickness.
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5493
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Hubs
« Reply #1 on: April 11, 2010, 04:37:00 PM »
They're determined by measuring the pre-load using a Ford SST. Its outlined in the FSM, if you have one.
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"