TeamCapri

Tech, Repairs, Upgrades => Capri N/A 89-94 => Topic started by: 3rdBird on November 01, 2010, 05:50:00 AM

Title: Heater box blend door
Post by: 3rdBird on November 01, 2010, 05:50:00 AM

My 92 has a broken fitting where the cable connects from the dash control to the blend door, it is broken off flush with the air box. No heat to the interior and its cold in Michigan.  Any work arounds?  Can I just cut the box open and rig up something?

Title: Heater box blend door
Post by: Gostlrs on November 01, 2010, 07:30:00 PM

Drill a few small holes in it..then use some plastic jb weld and reattach it over the part that broke off and make sure it goes into the holes you drilled as well. I did that to install my billet grill on my Yukon and worked like a champ

Title: Heater box blend door
Post by: Hollis on November 05, 2010, 01:34:00 AM

http://www.sportsimportsltd.com/12vocarvvabo.html (http://www.sportsimportsltd.com/12vocarvvabo.html)

Here is a heater for ya  :D

Title: Heater box blend door
Post by: Gostlrs on November 06, 2010, 08:11:00 PM

Too funny...I was sooooo close to getting one of those for mine. My heat was luke warm at best in mine....