TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: part name  (Read 2808 times)

manuel

  • Newbie
  • *
  • Posts: 32
part name
« on: July 25, 2010, 05:51:00 PM »
what is the name or part # of the valve on the firewall to the fuel regulator? the people at autozone don't know what it is
Logged
manuel r

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5493
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
part name
« Reply #1 on: July 25, 2010, 07:19:00 PM »
Its just a solenoid valve... it closes when the engine is re-started hot to keep fuel pressure up. Its not really a critical part, is it giving you problems?
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


bhazard

  • Sr. Member
  • ****
  • Posts: 337
part name
« Reply #2 on: July 26, 2010, 05:06:00 AM »
Ditch it and run vac source straight to the regulator, you'll be fine.
Logged
93 Festiva L, lotsa miles, BP+T/G25MR swap, Rocketchip
Best ET 12.99, Best MPH 109.8, 22\\" slicks
88 T-bird Turbo Coupe, 182k miles, slightly modded, 14.71 @ 92.4mph 2.02 60\\\', end of the road

manuel

  • Newbie
  • *
  • Posts: 32
part name
« Reply #3 on: July 26, 2010, 03:02:00 PM »
it was giving me problems it ran for 10 min. then died after a day it started for another ten min. i was checking the grounds and vacum hoses i tried to pull the hose that goes to the top of it and brocke the niple i unpluged the whole thing sprayed starter fluid and run good with out it.
Logged
manuel r

drbob

  • Old-Timer
  • *****
  • Posts: 1367
part name
« Reply #4 on: July 27, 2010, 07:24:00 AM »
manuel, how did those lambo hinges word???  The Capri world is waiting to know.
Logged
Mid-America Capri Gathering Founder/Team Capri Moderator
--------------------------

1994 Mercury Capri made in AUSTRALIA
AUSTRALIAN Cattle dog/brittney mix
AUSTRALIAN Shepherd
Is anyone else sensing a pattern?

manuel

  • Newbie
  • *
  • Posts: 32
part name
« Reply #5 on: July 27, 2010, 04:42:00 PM »
drbob     i had to buy some equipment to make them my self to sell them at a better price i still need a mill/lathe combo to do it faster and,i just moved  and i found out i dont have 220v anywhere but im still working on making some  ill send u a private message to let you know a bout the price  i think russ wants to sell them im not sure but ill work something up with you.
Logged
manuel r