TeamCapri
Tech, Repairs, Upgrades => Capri N/A 89-94 => Topic started by: JimmyGermany on October 30, 2023, 06:42:22 AM
-
Gentlemen!
Been a while since I posted here. Been busy with my Capri’s bigger “grand” brother. I’ve unwittingly started a collection of red Mercurys.
Anyhow - one of my winter projects is to refurbish a shifter linkage I picked up somewhere. (It’s been sitting around for a while and I don’t remember where). I also got a rebuild kit that very helpfully came without instructions.
Anybody got a set of pics or an explosion diagram of how the linkage is set up?
Thanks in advance.
James.
PS - In the shop that has my Grand Marquis, they’re also working on a Capri like ours. I think my land-boat is in good hands.
-
It's really simple. The back on is just a bolt. The front ones have to have the swaged end of the rivet ground off and replaced with a shoulder bolt. In the US SAE bolts require a washer to take up a little slack, you may be able to get metric bolts that fit.
-
check out this posting:
https://www.teamcapri.com/forum/index.php/topic,4344.msg134097.html#msg134097 (https://www.teamcapri.com/forum/index.php/topic,4344.msg134097.html#msg134097)