April 27, 2024, 07:53:28 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
If you've registered make sure emails from TeamCapri are not landing in your spam folder!
Home
Help
Search
Login
Register
TeamCapri
>
Tech, Repairs, Upgrades
>
Capri XR-2 89-94
>
Headlight motor grease
« previous
next »
Pages: [
1
]
Print
Author
Topic: Headlight motor grease (Read 3114 times)
Racer_X
Newbie
Posts: 8
1991 XR2
Headlight motor grease
«
on:
August 30, 2016, 11:47:02 AM »
So, all of the threads about headlight motors mention putting new grease on after you clean up the contacts.
Does the grease go only on the gears, or are you putting it on the contacts as well?
Logged
blueamber
Sr. Member
Posts: 450
Re: Headlight motor grease
«
Reply #1 on:
August 31, 2016, 08:48:07 AM »
Contacts and copper plate as well if you want the cleaning to last awhile... copper will tarnish if not protected from the elements. I use a heavy lubricant on the gear, light on the contacts, all water proof of course...
Logged
Racer_X
Newbie
Posts: 8
1991 XR2
Re: Headlight motor grease
«
Reply #2 on:
September 03, 2016, 10:14:42 PM »
Thanks!
Logged
Racer_X
Newbie
Posts: 8
1991 XR2
Re: Headlight motor grease
«
Reply #3 on:
September 04, 2016, 10:16:04 PM »
Hmm, I guess I will still clean the contacts, but they look pretty darn clean to start with. For those of you who have had these apart before, what do you think?
I started out on this venture because one of the lights wouldn't go up. As clean as those contacts look, now I'm wondering if the motor might be bad.
Logged
Racer_X
Newbie
Posts: 8
1991 XR2
Re: Headlight motor grease
«
Reply #4 on:
September 09, 2016, 09:18:12 PM »
Well, I cleaned the contacts up anyway and it works like a charm now.
I figured I should post my results anyway so if someone looks at this in the future they will know - even if the contacts look clean, they may not me clean enough.
Logged
Bitter
Newbie
Posts: 12
My friends Capri is a thorn in my side.
Re: Headlight motor grease
«
Reply #5 on:
November 04, 2016, 01:05:54 AM »
I used silicone di-electric grease when I did one recently because it resists electrical current and insulates parts. Two of the contact arms in this motor had a big wad of grease on them that had corroded green and was jumping them together causing the motor to cycle in an odd fashion. It would open about an inch and then fully cycle open to closed when the lights were put down, very weird. Once I cleaned the plate and contacts with high grit sand paper and polished it all up with a little rubbing compound I wiped everything with isopropyl alcohol (91%) then smeared silicone di-electric grease on all the parts and even the gears, now it works great, a little quicker than the other side actually. The silicone grease is good to low and high temps so it won't gum up or easily melt off.
https://www.permatex.com/products/lubricants/specialty-lubricants/permatex-dielectric-tune-up-grease-4/
Logged
Print
Pages: [
1
]
« previous
next »
TeamCapri
>
Tech, Repairs, Upgrades
>
Capri XR-2 89-94
>
Headlight motor grease