TeamCapri
Tech, Repairs, Upgrades => Aftermarket => Topic started by: rcicustoms on May 28, 2009, 03:27:00 PM
-
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar1.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar2.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar3.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar5.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar6.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/tonneaucover.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar7.jpg)
(http://i258.photobucket.com/albums/hh278/RCIfabrication/miatabar4.jpg)
i had a whole writeup, but it had 9 pics and the stupid board threw it out, so heres the pics yall wanted, but im tired of typing so if you want to know something just ask...Joe
-
do theese help yall ???
-
Bumpin on up ,to the topside....LOL
-
That looks real nice very hepful but i went into a different direction and i will let you all know how it turned out.
-
Also RCI where and how did you mount those seats. Ive been looking around for seats but cant figure out how to mount them.
-
Very nice, prob the route I'll take. :cool:
-
if you ger the universal sliders they will fit on the cross memebers, just drill and bolt in. thats what i did with mine. if you had welding skills you could easily remove the ends where the factory bolts go through and have them welded on so you can use the factory bolts. something i might do later on next time i get some welding done.
-
hit it on the head gost ...universal sliders and i fabed some feet for em and welded em up....
-
hit it on the head gost ...universal sliders and i fabed some feet for em and welded em up....
-
hit it on the head gost ...universal sliders and i fabed some feet for em and welded em up....
-
How much of a difference does that air dam make at the roll bar ?
-
its noticeable at highway speeds ...i had it on the car a while before i bought the rollbar...
-
i felt a big difference when i put on my bubble cover as well. i put my windows up about 1/4 the way and the wind in the cab in very minimal. i can even talk on the cell phone with the top down
-
Bumping this for the guy who was looking for the bracket design