TeamCapri

Tech, Repairs, Upgrades => Capri N/A 89-94 => Topic started by: zoom-zoom on January 30, 2015, 11:20:53 PM

Title: 1994 N/A sloppy shifter
Post by: zoom-zoom on January 30, 2015, 11:20:53 PM

Whats involved in tightening up my 5sp shifter in my 1994 N/A Capri?  It flops around pretty bad but not causing missed shifts or grinding gears.  Thanks!

Title: Re: 1994 N/A sloppy shifter
Post by: 010sambo on January 31, 2015, 09:34:10 AM

You have to replace the nylon bushings. That consists of raising the vehicle so you can work freely under it and safely.  I bought my  replacement bushings at Napa for about 10$
 It's not that difficult to replace. You might run into a frozen nut or bolt. But after you remove the shifter link it's pretty simple to replace em.

Title: Re: 1994 N/A sloppy shifter
Post by: greywolf27030 on January 31, 2015, 10:17:09 AM

There's already a good discussion going on here:

http://teamcapri.com/forum/index.php/board,19.0.html

It's not that big a deal except for gringing out the rivet.

Jack Byrd