TeamCapri

General => General => Topic started by: rocman on February 18, 2012, 07:01:00 AM

Title: Fog Lamp assembly
Post by: rocman on February 18, 2012, 07:01:00 AM

Anyone have info on replacing the lamp assembly. I thought I just needed to replace the bulb but the lens is cracked.  Found a part number Hella 138 238-00 on the assembly but finding nothing.

Any help would be appreciated!

Title: Fog Lamp assembly
Post by: Rocketman on February 19, 2012, 05:38:00 AM

Unfortunately I don't think any of the parts are available new anymore. They were originally made by Hella for Ford. You might try Russ at www.roo-sport.com (http://www.roo-sport.com) - he usually has good used foglights. I'm assuming this is for a 91-93?

Title: Fog Lamp assembly
Post by: newboyracer on February 19, 2012, 01:41:00 PM

I have a spare set of hella fog lights I would sell you because they wouldn't fit on the front of my car with my FMIC.

Title: Fog Lamp assembly
Post by: rocman on February 20, 2012, 02:06:00 AM

For my 91 XR2. I do have a body kit and the lights are a bit more recessed than normal which might make them less effective. I have owned the car for two years now and they have not been operational since I bought. I finally got around to pulling the lamps this weekend.  

Newboy - I'll shoot you a PM.

Thanks

Title: Fog Lamp assembly
Post by: Rocketman on February 20, 2012, 02:09:00 AM

You probably have the Erebuni kit. It might be worth it to look into an aftermarket foglight that will fit a bit better and won't be masked by the kit

Title: Fog Lamp assembly
Post by: rocman on February 20, 2012, 05:26:00 AM

Not sure what kit but looks a lot like the kit on your Capri.  

I think I may try to find an aftermarket solution. Right now the front spoiler looks incomplete without the driving lights. I would also like to have them for function as well.

Title: Fog Lamp assembly
Post by: Rocketman on February 20, 2012, 06:11:00 AM

Yep mine has the Erebuni kit as well. The Razzi kit I don't think covers the foglights at all.

I will eventually get around to new fog/driving lights but that hasn't been very high on my list, lol. I took the stockers out, they were a little busted up and no good.

I want to work on my custom headlights before anything else though

Title: Fog Lamp assembly
Post by: mtmccain on February 26, 2012, 01:32:00 PM

Does anyone know what size of nut the bolt which is welded on that the fog light attaches too is?
I do not have anything that fits so I dont have a sample to go by for buying the nuts.
So I am looking for nut size and type of thread.