TeamCapri
General => Photographs => Topic started by: Capritain on March 08, 2014, 02:49:05 AM
-
Found pic of my project lost from old site.
Can't wait to work on it again.
(http://i61.tinypic.com/2qd3lf4.jpg)
-
Finally got around to work on cosmetics again.
taping it so I can fiberglass it. Inspired by the capri in Thailand
Also cut off the middle part so grill would look better once installed.
(http://i62.tinypic.com/2d8hxz8.jpg)
-
first fiberglass layed.
(http://i58.tinypic.com/mueo8g.jpg)
-
Awesome work! This is gonna look really cool once it's done. What was the donor kit from?
-
89 240SX
I took your advice a while back, to lower the front air dam, that's why I had to cut and patch the side.
-
The front is from this model, but I cut the middle part out to have a bigger grill
(http://www.erebuni.net/images/autos3/240sx276f.jpg)
The back is from this model
(http://www.erebuni.net/images/autos3/240sx276r.jpg)
-
I wish I can just get it all done in one day. Instead have to do one little step at a time.
Here's my update, been working on the rear bumper. Next week should be ready for bonding and sanding.
I would really like to get my hand on that half Clubsprint tail lights but replace them with clear lens and LED.
How much do they cost? How much would one pay for a set?
To do list:
raise the center console with arm rest
move the mirror control to the door or around the dash
move the control at the door up little.
(http://i60.tinypic.com/35jw11j.jpg)
(http://i60.tinypic.com/sz7xjn.jpg)
(http://i61.tinypic.com/5l810k.jpg)
-
I just saw this post....
If you are interested in a HalfSprint panel, cost will be around $300, lights NOT included (too many options available for me to stock them all)...We are re-starting the fiberglass projects, and will have some things to announce around Black Friday....Stay tuned!
--Russ
-
Hey Russ,
What size light fit in it, 4"?
-
Yes, Sir!! They are 4" rounds. There are literally 1000's of choices for these lights - standard, LED, etc...
--Russ