TeamCapri

General => General => Topic started by: icurunnin on August 25, 2009, 12:47:00 AM

Title: mounts?
Post by: icurunnin on August 25, 2009, 12:47:00 AM

anyone know of a place to fine motor mounts for these cars? I called every place I could think of with no luck.

Also I was replacing the output shaft seal again on the driverside yesterday.when I was pulling the spindle off the strut the entire strut came out the strut mount and the bearings went a rollin. any luck on where to find these as well?

I plan to put a nice set of springs and struts on this thing to help the handling out.

Title: mounts?
Post by: sterling94capri on August 25, 2009, 02:54:00 AM

If you look for 87-89 mazda 323 mounts you might have more luck. I got one at Oriely auto parts real cheap. There are a few guys on the sight that could help to, like Russ with his Roo sport operation. There are also some solid hi-po ones out there like, I think one company is called dark star.Hope that helps,Rocky.

Title: mounts?
Post by: David Deutsch on August 25, 2009, 03:41:00 AM

I use amazon automotive for alot of my parts searching.
Here's a link to Mercury 1.6 motor mounts
http://www.amazon.com/gp/product/compatibility-chart/B000CGFEWG/ref=au_pf_dp_chart (http://www.amazon.com/gp/product/compatibility-chart/B000CGFEWG/ref=au_pf_dp_chart)

Title: mounts?
Post by: icurunnin on August 25, 2009, 06:23:00 AM

I found the front strut mounts at pep boys for $26 which are monroes. Sound pretty cheap to me compared to autozones $46 for gabriel which is a special order only.

I will check out the link you gave me. Thanks!

So the 323 and Capri use the same mounts?