Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[DashingDaryl]

Can anyone help me with a motor mount number?

Checker/Kragen/OReilly No longer lists it on their website.

Autozone has one mount, DEA A6459

Autoparts maverick list a DEA A6459 :
1986 - 1989 Mazda 323 1.6 Front Right Standard Trans 1987 - 1989 Mercury Tracer 1.6 Front Left Standard Trans

I know that the Capri, 323, mx-3, Tracer and maybe the escort are all the same, but how can one mount be a left mount on one car, and a right mount on another?

Can anyone help me cut through the fluff, and give me a Number for the Front and Rear Mounts?

[bryanknight]

well they can be the same for both cars because the motor could be turned..  but that mount that you list is the right front motor mount if look at the car from behind and its not the same as the xr2 mount.. the book does not give a part number just a number so you can look it up like that.. the xr2 has two motor mounts and a trans mount  rockauto does have three different parts list for that same mount so i dont know if you have a xr2 or na 5speed or auto but you have to look up a mazda 323 89 turbo

[DashingDaryl]

Can someone help me with the Proper Cross reference for my 91 Capri N/A?

When I went to Autozone I told them to use an 88 323 but they said it was a SOHC not a DOHC. A 91 323 is also a SOHC. Do people just use the 88 323 for the Turbo aspect?

What is the proper year I should use for a 91 N/A?

[Rocketman]

The 88 or 89 turbo is a DOHC and should work.

Rockauto lists

ANCHOR Part # 8065 $18.83
BECK/ARNLEY Part # 1041054 $34.79

[bryanknight]

the 89 323 was the turbo car  it was a 323 gtx turbo

[sterling94capri]

I got the Anchor part,works fine on my 94 xr2. I believe all 5sp cars use the same mounts. I wish I had gotten the Darkstar Motorsports filled mount. But I'm not gonna pay more to replace a new part untill I need to, new clutch upgrade or something.Rocky

[Rocketman]

If anyone has extra or old broken mounts laying around, I'll buy them from you... I have some high durometer urethane I've used to make many engine mounts before. They come out much real hard, not rock solid but just right, and they'll last damn near forever

[DashingDaryl]

Thank you to everyone who posted an answer.

For posterity and those who find this post in a search, the "Genuine Ford Part Number" for a 91 n/a Capri front motor mount is E7GZ-6038-C

I changed it with a NAPA 602-1808 (Made by Balkamp) and it seems to be fine. (Though the Balkamp mount had a slightly wider Center Shaft)

[Gostlrs]

Did you call penny pincher?

i got mine from there before

27th and van beurn..

keep them in mind...so much cheaper on many parts