TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: End Link  (Read 1905 times)

sterling94capri

  • Full Member
  • ***
  • Posts: 207
End Link
« on: April 24, 2011, 03:32:00 AM »
One of my rear end link sway bar bushings is crumbling,the others don't look real stout either.Anybody know which energy suspension part I need for a 94 xr2?Thanks Rocky
Logged

tonlaw71

  • Administrator
  • Sr. Member
  • *****
  • Posts: 493
    • 1992 XR2 and a 2013 Nissan Juke
End Link
« Reply #1 on: April 24, 2011, 07:49:00 PM »
Hey Rocky,

Are you looking just for the bushings, or the whole kit?

Here are the kits I used on my 91 NA and my 91 XR2. I had to modify them for the front on the XR2 because the end of the sway bar was rubbing the half shaft when I turned the wheel, but they still work great.

Energy suspension part # 9.8125 (available with black or red bushings)

Hope this helps.
Logged
///Tony aka Bubba Gumpshrimp\\\

///'92 Plasti-Dipped XR2\\\

sterling94capri

  • Full Member
  • ***
  • Posts: 207
End Link
« Reply #2 on: April 25, 2011, 07:21:00 AM »
I was hoping for the end link kit for the rear sway bar.Did that p# fit your rear with out mod?thanks Rocky
Logged

tonlaw71

  • Administrator
  • Sr. Member
  • *****
  • Posts: 493
    • 1992 XR2 and a 2013 Nissan Juke
End Link
« Reply #3 on: April 25, 2011, 11:07:00 AM »
They were a little tight in the rear, but once I got em in and tightened down, they were perfect. No mods needed.
Logged
///Tony aka Bubba Gumpshrimp\\\

///'92 Plasti-Dipped XR2\\\