TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: A/C blower connection  (Read 2449 times)

mcanchola2

  • Full Member
  • ***
  • Posts: 107
A/C blower connection
« on: August 06, 2011, 06:29:00 AM »
ive notice that if i bypass this the blower turns faster in all the speeds do i really need this
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5493
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
A/C blower connection
« Reply #1 on: August 06, 2011, 06:51:00 AM »
The blower resistor pack is on the upper right side of your pic there, screwed into the blower housing.

I would say don't bypass it - the extra current may melt the selector switch in the dash. I have had to replace one switch already that was damaged from melting
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


mcanchola2

  • Full Member
  • ***
  • Posts: 107
A/C blower connection
« Reply #2 on: August 06, 2011, 08:46:00 AM »
ok i see but whats that black thing thats being held just below the resistors, im asking this cuz the previous capri i had didnt have this and the single blue wire that goes between the resistor pack actually had a connector that plugged into that one single blade socket thats there on the resistor pack
Logged