TeamCapri
General => General => Topic started by: Nicklock20 on February 26, 2011, 09:15:00 AM
-
Just picked up a 91 xr2 (fell in love with it on day one) and shifter has a lot of play. wondering how difficult installing some new shifter bushings is going to be.
-
I installed all new bushings in my 91 NA in about half an hour. That was after I sprayed the bolts with the break free gunk. It really is easy to do and makes a huge difference. I believe there is a sticky on here with a few options on where to get them.
Have fun!
found the sticky: Shifter Bushings (http://teamcapri.com/capri-gi/ultimatebb.cgi?ubb=get_topic;f=16;t=000077)
-
Tried sticky, but it's marked "Forbidden"!!!
Found the NAPA listing: https://www.napaonline.com/en/p/ATM0771303#
Did not find stabilizer bushing or insert anywhere except Roo-Sport. com , which I have not been able to connect with.
-
Tried sticky, but it's marked "Forbidden"!!!
Found the NAPA listing: https://www.napaonline.com/en/p/ATM0771303#
Did not find stabilizer bushing or insert anywhere except Roo-Sport. com , which I have not been able to connect with.
I couldn't get into the sticky either, same result. Thanks for the NAPA part number, I didn't have any luck locating it a few months ago when I was searching.
Jack Byrd